Otterbein NHL 2 is a natural hydraulic lime that delivers the perfect balance of strength and breathability.

Secil NHL 5 is normally used for flooring such as limecrete floors or in highly exposed locations such as chimney flaunching etc.

Cal RB is used for the conservation of old buildings and is also suitable for application onto substrates such as concrete, bricks or stone. etc.

ISOVIT E-CORK is formulated from mixed binders, cork aggregates and Natural Hydraulic Lime. For bonding thermal insulation board.

Used mainly for masonry and external plaster works. The most popular material for new build work.

Used mainly on historic buildings, soft masonry and where exact mortar matches are important

Decorative coat for lime plaster

100% fibreglass mesh with 160 g/m2 anti-alkaline treatment

Used to improve tensile strength and to reduce shrinkage cracking

Secil 2 can be used for internal plastering. Can be used with fine sand for skim coat. 

Cal CS is a preparation mortar before the application of a new coating.

Cal AC is a finishing plaster generally used externally. 

​Secil ecoCORK Lime is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, lime aggregates and additions

Used mainly for masonry and external plaster works. The most popular material for new build work.

Final skim coat for lime plaster

Provide extra grab for the fibrous lime plaster

Used to improve tensile strength and to reduce shrinkage cracking

Colourants are traditionally used as additives to lime coatings to provide a coloured finish.

Secil NHL 3,5 is ideally suited for bedding, rendering and pointing.

A general purpose breathable lime mortar for building or pointing stone, brick and block.  Ideal for conservation, restoration and newbuild. 

Cal AC Fino is a fine finishing plaster with smooth finish

Feebly Natural Hydraulic Lime - Used for internal plastering and externally where the masonry is made up of a soft material

Used to gauge traditional lime mortars and plasters, as well in situations that require rapid setting or exceptionally high compressive strengths

High Calcium Quicklime Pebble and Powder, used for making lime putty and hot-mixed or hot-lime mortars.

Hessian Frost Protection roll

Churn brush, leaves a flush finish with an open texture.